• 15,000 square feet
• crane height - 50 feet
• controlled environment
• fabrication equipment
  • 1 station for optic exterior surface (OD)
  • 2 stations for optic interior surface (ID)
  • 1 station to endcut optic
• optic metrology stations
  • 2 stations for circularity and diameter (interior)
  • 1 station mechanically measure ID axial figure
  • 1 station optically measure ID axial figure
  • 1 station to measure ID surface roughness

Point of Contact: Dr. James M. Carter (256)544-3469